Flight Time: 1.2 hours ... Total Engine Time: 95.4 hours
Build Time: 0.0 hours ... Analysis Time: 0.0 hours
While the drive belt "feels" right, there has definately been some roughness in the plane at certain RPMs. Checked engine mounts are ok. Tightened the new belt some more and the roughness got better.
Removed p/s for the old strobes.
Noticed where the left wheel has been rubbing on the wheel fork (it doesn't hit in a static condition, but apparently does during landings). Added two washers to slide the wheel away from the fork, and added a little stripe of paint on the wheel so I can see if it is still getting rubbed.
Remounted the compass with brass hardware. Will try calibrating next time I get a chance.